Doucet Clamp Carrier Model SRH-40-8.5-240-36 40 Section Clamp 8.5' Wide (240) 2-1/2" x 36" Clamps - Rapid Change Voltage: 480/3/60

Maximum Assembled Product Size: 37.5” x 98” Minimum Assembled Product Size: 11.375” (vertical) x 9.75” (horizontal) with spacer blocks 7.5” (vertical) x 5.5” (horizontal) Maximum Framing Width: 4” Minimum Framing Width: 1.5” Tubular Steel Frame THK Linear Bearings and Rails (1) Allen Bradley Compact Logix PAC (4) Allen Bradley Kinetix Servos and Drives a. (1) Vertical Beam b. (1) Horizontal Beam (2) On the Upper Right Hand Clamp to ensure that uniform pressure can be applied regardless of the cut accuracy of the frame parts (1) Hoffman Upright Enclosure Allen Bradley Control Components (Push Buttons, Relays, Power Supplies, Buzzer, etc.) (1) Hoffman Air Conditioner for Electrical Enclosure EMS Press Control/Server Communication Software Package (4) Tregarne Woodwelder with Production Gun

Laminating Rolls: 61" (155 cm) roll face with thermally conductive high release silicone surface; upper and lower main rolls internally heated; temperature controlled by state-of-the-art infrared sensors and digital PID controllers Laminating Opening: 1.5" (3.8 cm) maximum opening controlled with dual air cylinders. Laminating Material Uses heat activated and pressure-sensitive materials 0 - 55" (0 - 140 cm) wide on a 3" (7.6 cm) ID core Laminating Speeds 0 to 14.5 fmp (0 to 4.5 mpm) Post Lamination: Fanless cooling system provides uniform, filtered air for thermal shock without exposure to dangerous fan blades. Vinyl Transfer Complete roll to roll transfer, lamination, and edge trimming in one pass Safety Features • Two emitter-receiver photoelectric systems protect rolls from damage. • Emergency kick cables front and rear. • All electrical and moving mechanical parts are located in bolted cabinets • Four emergency stop buttons Installation Requirement 220 to 240 VAC, 50/60 Hz, 55A. 32 A per phase. Air: 2 cfm at 100 psi, minimum(0.5 m3 at 700 vPa)

Homag Cabteq S-250 Case Clamp

Operating voltage 220v, 3PH 43” x 96” capacity on platens Electric heating Hydraulic pressure – up-acting cylinders Free-standing control cabinet Heat regulators for each platen Timers Double palm safety switch

JLT 79X-5-DM Door Clamp

JLT Panel Pro Clamp Model 78D-5-S 5-Levels with (6) clamps each with panel flatner 110 v Single phase Will do 80”x 40”

Two Bay 52" capacity Pneumatic clamping

Marbel LS-1 Laminate Slitter

Specification from owner 5 Foot Wide - Midwest Automation top and bottom high pressure laminating line capable of laminating up to 5’ x 12’ panels consisting of the following equipment: Powered infeed roller conveyor PC-160 panel cleaner with top and bottom nylon brushes and dust collection shrouds. GS-417 top and bottom glue spreader with 65” panel width capacity, glue rolls are in excellent condition, separate top and bottom direct drive motors, powered opening, glue pump system. PP-500 panel positioning station for panels up to 62”W x 148”L x 1.63”T. RP-3170 heated roller press with 67”W high temperature silicone covered top and bottom rolls. SL-510 scissor lift table, 5’ x 10’ roller platform and 6000 lb. capacity. Includes 2 new recoated glue rollers and manuals. All equipment is 575V, 3PH. May consider selling pieces separately.

Monco TB60 60" inch Hot Roll Laminating Line 65" Cap., Top & Bottom Laminator with oil heated chrome plated rollers 14" roller diameter 25 - 106 FPM 5 HP feed motor 48 kW oil heating system, 400° F max. heating including over-temperature cutoff safety device. 1 HP Oil circulation pump & a 1.5 HP hydraulic system for up to 900 PSI line pressure 3" dia. x 4" stroke cylinders control roll pressure. 62" width capacity. Solid-State temperature, high limit & cool down controls Manual emergency stop system on all (4) columns to stop the drive & raise the rolls.

Ogden SL3660 RFS

Quick Clamp Rack 12' Wide Clamp: 3.5" wide, 40" opening

Quick Clamp Carrier Model: SA-CCFP-10.5-14 10.5' Wide 14 Section Clamp: 2.5" high jaw, 38" opening Pneumatic clamp tightener Pneumatic Panel Flattener Electric Drive

This line has not been run in approx 10 years. The current warehouse/facility may also be available for sale.

Capacities: 11” minimum length 98” maximum length 1” minimum width 32” maximum width 5/8” minimum thickness 3” maximum thickness with a conversed glue spreader(model 30J)

Capacities: 11” minimum length 98” maximum length 1” minimum width 32” maximum width 5/8” minimum thickness 3” maximum thickness Includes glue conveyor Model 300194-300198

Dry glue joints in seconds.

Bertheson Press Platform size 51 Wide X 102 Long with 2 16 ft shuttle driven aluminum runner platforms. Pressure 2500 psi and we ran a temperature of 350 degrees for Tego and 165 degrees for plywood. The Press can laminate Tego Film glue or pva c glue. This press is a double shuttle and can laminate up to 14 ft by double pressing on shuttle. We can get the press operational if you are interested. We only have to hook up the power. Very good condition!

Biesse Cosmo Case Clamp Bought new, never used